38 Special - Landing Gear - Profile - (BG-1722)

2 landing legs in pack. This landing gear is meant to be used with profile aircraft and is made from hardened Aluminium alloy. Very strong and  suitable for most aircraft from engine size ...

Beam Motor Mount - .049 - 1/2A - (BH-794)

1 set in pack. Contains - 2 x Beams Mounting Hardware This mount can be used to convert your radial mount .049 powered aircraft to take an .049 beam mount engine such as the Brodak...

Bellcrank - C-22 - 3 Line - Upright Shortspan - 2-1/2" Metal - (BB-376)

1 set in Pack. 2-1/2in. Upright. Shortspan. Mounts on the top of bellcrank floor and is used when the engine is in the upright position, allowing you the most direct route to the throttle. When...

Bellcrank 2" Nylon - (BB-387)

1 set in Pack. Suitable for smaller/lighter aircraft. Comes with - Bolt - Washers - Nut - Post - Bellcrank. Can be fitted inside the fuselage, or on, or inside a wing.  The 2in bellcrank can...

Bellcrank 2" Nylon with Post - (BB-397)

1 set in Pack. Suitable for smaller/lighter aircraft. Comes with - 1 Nylon Bellcrank & Bush 3 Brass Eyelets 2 washers 1 Post The 2in bellcrank can provide the pilot with greater...

Bellcrank 3" Nylon - (BB-388)

1 set in Pack. Suitable for average size aircraft. Comes with - Bolt - Washers - Nut - Post – Bellcrank. Can be fitted inside the fuselage or on or in a wing. The 3in bellcrank can...

Bellcrank 3" Nylon with Post - (BB-395)

1 set in Pack. Comes with - 1 Nylon Bellcrank & Bush 3 Brass Eyelets 2 washers 1 Post Note : Requires Soldering  

Bellcrank 4" Nylon - (BB-389)

1 set in Pack. Suitable for larger aircraft. Comes with - Bolt - Washers - Nut - Post – Bellcrank. Can be fitted inside the fuselage or on or in a wing.  The 4in bellcrank can provide...

Bellcrank 4" Nylon with Post - (BB-396)

1 set in Pack. Comes with - 1 Nylon Bellcrank & Bush 3 Brass Eyelets 2 washers 1 Post Note : Requires Soldering  

Bellcrank Nylon 1/2A - (BB-390)

1 set in Pack. Suitable for small, light aircraft.  Comes with - Bolt - Washers - Nut - Post – Bellcrank - mini Control Horn. Use this bellcrank only with aircraft powered by .049 or ...

Brass Eyelets - 1/16 I.D. - (SH-213)

Brass Eyelets 15 in a Pack. Each eyelet has a flanged opening at one end Approx 1.6mm (1/16 inch) inside diameter Approx 10 mm long.

Brass Eyelets - 1/32 I.D. - (SH-212)

Brass Eyelets 15 in a Pack. Each eyelet has a flanged opening at one end 0.8 mm (1/32 inch) inside diameter Approx 5 mm long.