Nylon Engine Mount - For .20 to .25 glow engines - (DAV-2025)

1 set in pack Contains - 1 x Glass Filled Nylon Motor Mount 4 x Screws for engine mounting.   When you install a Dave Brown glass filled engine mount, your model will be lighter, and your engine will have a much better chance of surviving...

Steel Axle Bolts - 6-32 X 1-1/2" (38mm) - (BH-703)

Pack contains - 2 x Bolts - 6-32 x 1-12" 2 x 6-32 Hex Nuts 2 x 6-32 Lock Nuts 2 x #6 Spring Washers

Engine Mounting Bolts - 4-40 X 1" (25mm) - (BH-107)

4 each in pack. 25mm (1") 4-40 (Countersink Head ) bolts x 4 Flat Washers x 4 Spring Washers x 4 Blind Nuts or (Tee Nuts) x 4

Engine Test Stand - 049 to .15 (.8cc to 2.5cc) - (BH-1250)

This Test Stand is used for breaking in engines on the workbench. Features - Made of Cast Aluminium An adjustable aluminium support base which may be bolted on to a workbench or table Can be used for Brodak .049 engines and up. Will take a OS...

Needle - to suit Brodak .25ci (4cc) & .40ci (6.5cc) Glow Engine - (BH-1361)

1 in pack. To suit Brodak .25ci (4cc) & .40ci (6.5cc) Glow Engine.

Viper - Foam Wing - Small - Stunt - Solid - 590*150*32mm - (VFW-10S)

Viper Foam Wings are made by Wights Model Aircraft with our in house designed & built semi-industrial CNC hot wire foam cutter.   The VFW-10S is a solid wing made of extruded Polystyrene. Due to its fine grain, rather than the chunky grain...

Needle Valve Assembly (.09) - Enya NVA - (EN-09220)

1 set in pack. To suit engines of 1.5cc (.09 ci) approx  Includes Needle, Spray Bar, Ratchet & Nut Spray Bar Diameter 3.98 mm Spray Bar Length 9.5 mm Thread length 10.5 mm Nipple Length 8.5 mm Overall...

Needle Valve Assembly (.15 - .19) - Enya NVA - (EN-15220)

1 set in pack. To suit engines form 2.4 cc (.15 ci) to 3.0 cc (.19 ci) approx  Includes Needle, Spray Bar, Ratchet & Nut Spray Bar Diameter 3.98 mm Spray Bar Length 11 mm Thread length 11 mm Nipple...

Needle Valve Assembly (.25) - Enya NVA - (EN-2520)

1 set in pack. To suit engines of around 4.0 cc (.25 ci) approx  Includes Needle, Spray Bar, Ratchet & Nut Spray Bar Diameter 3.98 mm Spray Bar Length 12.5 mm Thread length 12.5 mm Nipple Length 6...

Needle Valve Assembly (.25 - .36) - Enya NVA - (EN-24920)

1 set in pack. To suit engines form 4.0 cc (.25 ci) to 6.0 cc (.36 ci) approx  Includes Needle Valve, Spray Bar, Ratchet & Nut Spray Bar Diameter 3.98 mm Spray Bar Length 12 mm Thread length 12 mm Nipple...

Needle Valve Assembly (.46 - .60) - Enya NVA - (EN-60220)

1 set in pack. To suit engines form 7.5 cc (.46 ci) to 9.8 cc (.60 ci) approx  Includes Needle Valve, Spray Bar, Ratchet & Nut Spray Bar Diameter 3.98 mm Spray Bar Length 16.5 mm Thread length 11 mm Nipple...

Shims for Correct Needle Valve Assembly Fitting - (EN-SPW4S)

4 in pack. Suits all ENYA NVA's Use these shims on either side of the Spray Bar, as required,  to help achieve correct placement of the fuel outlet hole. The hole ideally should be located within the middle half of the Venturi, according to...