Hinges - Simple - AC (BH-927)

24 pieces in pack. Approx - 20mm x 22mm x 0.3mm.   How to use. Cut the hinge to your desired size, and to reduce overall stiffness. Slot the wood to take the hinge. Make a hole through the slot from top to bottom. Fit the hinge. Place...

Hinges - Medium - Nylon with Metal Pin (BH-929)

15 pieces in pack. Plastic - 15mm x 27mm hinge with metal pin. With care these hinges can be used with 3mm thick balsa but are better suit to greater thicknesses.

Control Horn - Offset Right - (BH-758)

1 in pack. 2.4mm (3/32”) Wire - 100mm (4”) reach - 3 hole Control Horn. Suitable for use when the pushrod exits the Right (Starboard) side of the fuselage and when the horn is pointed down. If fitted with the horn pointing up it is...

Control Horn - Offset Left - (BH-757)

1 in pack. 2.4mm (3/32”) Wire - 100mm (4”) reach - 3 hole Control Horn. Suitable for use when the pushrod exits the Left (Port) side of the fuselage and when the horn is pointed down. If fitted with the horn pointing up it is offset...

Retaining Mounts - for 2.4mm (1/8") Wire Control Horns - Brass - (BH-745)

2 in pack. 3/32” Brass Control Horn retaining mounts. Can be used with Control Horn (BH-753).

Control Horn - No Offset (Center) - (BH-753)

1 in pack. 2.4mm (3/32”) Wire - 100mm (4”) reach - 3 hole Control Horn. Suitable for use when the pushrod exits the center of the fuselage. Can be used for both Flaps and Elevator.

Hinges - Medium - Nylon with Metal Pin (WMA-114)

10 pieces in pack. Plastic - 15mm x 27mm hinge with metal pin. With care these hinges can be used with 3mm thick balsa but are better suit to greater thicknesses.

Control Horn - Nylon 'T'-Style - (DU-237)

2 sets in pack. Comes with bolts and mounting plates. Suitable for most Control Line aircraft. Heavy duty mount and horn with 5 adjusting holes.