Anderson Style Harness (Type 1 -14AWG) - (WMA-766)

1 set.   14AWG - up to 45Amps Assembled in Australia from quality imported parts and Silicon wire. Includes -       1 x Harness.       1x Arming...

Arming Link - (WMA-769)

1 piece.   For use with the Anderson style harness. Assembled in Australia from quality imported parts and Silicon wire. Contains 1 x Red & Black Plug used for arming the...

Engine Mount Fixing Multi-Set - (WMA-179)

For Bee Engines with Integral Tank 1 set contains: 4 x (2mm * 10mm Hex Head bolts) 4 x (2mm Spring Washers) 4 x (2mm Flat Washers) 4 x (2mm Lock Nuts) 4 x (2mm Blind Nuts) 2 x...

Fuel Bottle (Soft) - 250ml - Glow Fuel - (WMA-761)

1 piece. 250ml filler bottle with medium fuel tube to suit control line engine of .07ci. and up. For Glow Fuel. Suits standard fuel tanks (with 1/8” pipes.) Nozzle is heat fitted to...

Fuel Bottle (Soft) - 500ml - Glow Fuel - (WMA-762)

1 piece. 500ml filler bottle with medium fuel tube to suit control line engine of .07ci. and up. For Glow Fuel. Suits standard fuel tanks (with 1/8” pipes.) Nozzle is heat fitted to cap...

Fuel Pick Up & Spring - (WMA-157)

3 each in pack. Cox .049. Fits on the needle valve inlet on the inside of an integral tank. For normal control line use - when looking at the inside of the backplate, with the needle pointing...

Glow Clip with Leads - (WMA-104B)

1 in pack, with wires. Clips on to the engine the old fashioned way – from behind. No need to risk your fingers with the modern ones by pushing and pulling and wriggling at the same time...

Hinges - Medium - Nylon with Metal Pin (WMA-114)

10 pieces in pack. Plastic - 15mm x 27mm hinge with metal pin. With care these hinges can be used with 3mm thick balsa but are better suit to greater thicknesses.

Leadout Wire Kit - Heavy - (WMA-103)

Wire Only  1 set in pack. Comes with 1 piece of .027 flying line. Length approx - 2200mm  - (approx 7' 2").

Needle & Spring - Bee - 049 - (WMA-158)

1 Needle and 1 Spring in pack. Cox .049. Suitable for most standard Cox 049 engines with integral tanks.

Piston Stopper - (WMA-84)

1 in pack. Can't get the propeller off? No need to use pliers on the prop hub. Simply screw this tool into a standard glow plug hole, move the piston up, and carefully undo the prop nut or wind...

Safe Tag - (WMA-765)

1 piece.   For use with the Anderson style harness. Assembled in Australia from quality imported parts. Contains 1 x Green Plug and a Fluoroescent Green Ribbon for visibility...