Control Horn - Offset Left - (BH-757)

1 in pack. 2.4mm (3/32”) Wire - 100mm (4”) reach - 3 hole Control Horn. Suitable for use when the pushrod exits the Left (Port) side of the fuselage and when the horn is pointed...

Control Horn - Offset Right - (BH-758)

1 in pack. 2.4mm (3/32”) Wire - 100mm (4”) reach - 3 hole Control Horn. Suitable for use when the pushrod exits the Right (Starboard) side of the fuselage and when the horn is...

Control Rod Retainer - 1/16" (1.6mm) Wire - (BH-720)

2 in pack. To suit 1/6" (1.6mm) Wire. Suitable for pushrods which use a 90 degree bend through the mounting hole. Stops the Pushrod from falling out of its mounting hole. Can be fitted to both...

Control Rod Retainer - 3/32" (2.4mm) Wire - (BH-722)

2 in pack. To suit 3/32" (2.4mm) Wire. Suitable for pushrods which use a 90 degree bend through the mounting hole. Stops the Pushrod from falling out of its mounting hole. Can be fitted to...

Control Rod Retainer - 5/64" (2.0mm) Wire - (BH-721)

2 in pack. To suit 5/64" (2.0mm) Wire. Suitable for pushrods which use a 90 degree bend through the mounting hole. Stops the Pushrod from falling out of its mounting hole. Can be fitted to...

Copper Wire - (BH-901)

1 piece in pack. Copper Wire can be used to bind the loop ends of leadouts and connectors. 914 mm long (36 inches) approx.

Cosmic Wind - (049) - CLP-14 (BACK ORDER ONLY)

Inspired by Carl Goldberg's original 1960's design Brodak had produced this great kit laser cut, fun to build and great to fly. It is precision engineered with built up wings and laser cut parts...

Covering Glove - Hanger 9

Hangar 9's insulated mitt protect your hand from heat as its extra-soft surface glides over the covering, helping you stretch and smooth it for a perfect finish. Works for both right and left hand,...

Dare De Havilland DH-9 (BACK ORDER ONLY)

The model's long nose, simple, light fuselage structure, generous stab and large wings make this model truly a biplane wakefield. The C/G should be set 2-1/16" from the leading edge of the top of the...

Ear Plugs with cord

Ear plugs with cord

Engine Mounting Bolts - 4-40 X 1" (25mm) - Lock Nuts

Engine Mounting Bolt set with Lock Nuts    (Counter Sunk) Pack of 4. 4-40 x 1" bolts (approx 25mm) Head Type - Straight Screwdriver slot Bolts x 4 Flat Washers x 4 Lock Nuts x 4

Engine Mounting Bolts - 4-40 X 1" (25mm) - T Nuts

Engine Mounting Bolt set with Tee (Blind) Nuts  (Counter Sunk) Pack of 4. 4-40 x 1" bolts (approx 25mm) Head Type - Straight Screwdriver slot Bolts x 4 Flat Washers x 4 Spring Washers x...